Step1.安装rp-pppoe-server
opkg update
opkg install rp-pppoe-server
Step2.配置/etc/ppp/pppoe-server-options
vi /etc/ppp/pppoe-server-options
--------------------------------------------------------------
# PPP options for the PPPoE server
# LIC: GPL
require-pap
#login
auth
mru 1480
mtu 1480
lcp-echo-interval 10
lcp-echo-failure 2
--------------------------------------------------------------
Step3.配置/etc/ppp/pap-secrets
这个文件配置验证时的帐号密码的。
vi /etc/ppp/chap-secrets
--------------------------------------------------------------
#USERNAME PROVIDER PASSWORD IPADDRESS
pppoe * pppoe *
test * test 10.0.1.2
--------------------------------------------------------------
Step4.设置开机自启动
vi /etc/init.d/pppoe-server
--------------------------------------------------------------
#!/bin/sh /etc/rc.common
# Copyright (C) 2006 OpenWrt.org
START=50
DEFAULT=/etc/default/pppoe-server
start() {
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -s 10.0.1.0/24 -j MASQUERADE
/usr/sbin/pppoe-server -k -T 60 -I br-lan -N 100 -L 10.0.1.1 -R 10.0.1.2
}
stop() {
killall pppoe-server
}
--------------------------------------------------------------
Step5.运行pppoe-server
chmod +x /etc/init.d/pppoe-server
/etc/init.d/pppoe-server enable
/etc/init.d/pppoe-server start
Step6.拨号
所有配置已经完成，接下来就可以拨号了。
Openwrt安装PPPOE-Server服务
pppoe-server参数
-L: 指定PPPOE服务器的IP地址
-R： 指定PPPOE拨入服务器分配给客户端的IP地址段
-N： 允许客户端同时拨入的数量（默认是64 最大是65534）
-k: 使用内核方式（不过好象无法使用）
root@OpenWrt:/etc# pppoe-server -help
Usage: pppoe-server [options]
Options:
-I if_name -- Specify interface (default eth0.)
-T timeout -- Specify inactivity timeout in seconds.
-C name -- Set access concentrator name.
-m MSS -- Clamp incoming and outgoing MSS options.
-L ip -- Set local IP address.
-l -- Increment local IP address for each session.
-R ip -- Set start address of remote IP pool.
-S name -- Advertise specified service-name.
-O fname -- Use PPPD options from specified file
(default /etc/ppp/pppoe-server-options).
-p fname -- Optain IP address pool from specified file.
-N num -- Allow 'num' concurrent sessions.
-o offset -- Assign session numbers starting at offset+1.
-f disc:sess -- Set Ethernet frame types (hex).
-s -- Use synchronous PPP mode.
-k -- Use kernel-mode PPPoE.
-u -- Pass 'unit' option to pppd.
-r -- Randomize session numbers.
-d -- Debug session creation.
-x n -- Limit to 'n' sessions/MAC address.
-P -- Check pool file for correctness and exit.
-h -- Print usage information.
PPPoE-Server Version 3.10, Copyright (C) 2001-2006 Roaring Penguin Software Inc.
PPPoE-Server comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under the terms of the GNU General Public License, version 2
or (at your option) any later version.
本文章由 http://www.wifidog.pro/2014/12/31/wifidog-openwrt-pppoe-server.html 整理编辑，转载请注明出处
